For Siemens ET200S

Product Description

6ES7151-3AA23-0AB0

SIMATIC DP, Interface module IM 151-3 PN ST for ET 200S Transmission rate 100 Mbit/s max. 63 power, electronic or motor starter modules up to 2 m width can be connected; 2x bus connections via RJ45 incl. termination module

General information

Product type designation IM 151-3 PN ST

Configuration control

via dataset Yes

Supply voltage

Mains buffering

● Mains/voltage failure stored energy time 20 ms

Input current

from supply voltage 1L+, max. 200 mA

Power loss

Power loss, typ. 3.3 W

Address area

Addressing volume

● Inputs 256 byte

● Outputs 256 byte

Interfaces

Number of PROFINET interfaces 1

Supports protocol for PROFINET IO

● Autocrossing Yes

● automatic detection of transmission rate Yes

● Transmission rate, max. 100 Mbit/s

● Number of RJ45 ports 2

Protocols

Supports protocol for PROFINET IO Yes

Protocols (Ethernet)

● TCP/IP No

● SNMP Yes

● LLDP Yes

● ping Yes

● ARP Yes

PROFINET IO Device

Services

— Isochronous mode No

— IRT Yes

— Prioritized startup Yes

— Shared device Yes

— Number of IO Controllers with shared

device, max.

2

Redundancy mode

● MRP Yes

Interrupts/diagnostics/status information

Diagnostics indication LED

● Bus fault BF (red) Yes

● Group error SF (red) Yes

● Monitoring 24 V voltage supply ON (green) Yes

● Connection to network LINK (green) Yes

Potential separation

between backplane bus and electronics No

between supply voltage and electronics No

between Ethernet and electronics Yes

Permissible potential difference

between different circuits 75 V DC/60 V AC

Isolation

Isolation tested with 500 V

Standards, approvals, certificates

CE mark Yes

UL approval Yes

Ambient conditions

Ambient temperature during operation

● min. 0 °C

● max. 60 °C

Dimensions

Width 60 mm

Height 119.5 mm

Depth 75 mm

Weights

Weight, approx. 150 g

Our Factory

Packing & Delivery

Our Company