Servo amplifiers and servo motors must be used in accordance with a specified combination to modify the product by mistake.
Noise filters can be used to reduce the impact of electromagnetic interference when the servo amplifier interferes with electronic devices around it. The electromagnetic braking of the servo motor is to control the shaft of the motor and cannot be used for normal braking.
Electromagnetic brakes do not act effectively due to aging and mechanical reasons (e.g., when connecting ball screws and servo motors through a synchronous belt), so a safe shutdown device should be installed on the machine. The servo amplifier may suddenly restart when the running signal has been entered, so we can only perform the alarm reset operation if we fully confirm that the running signal has been discharged, so as not to cause an accident.